Ethernet compatible Compact 2D Code Reader

SR-650 series

This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

Recommended Replaceable Products: Ethernet-compatible 2D Code Reader, Long-distance Type - SR-752

Ethernet-compatible Small 2D Code Reader, Long-distance Type SR-652

SR-652 - Ethernet-compatible Small 2D Code Reader, Long-distance Type

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Data Sheet (PDF)

Specifications

Model			SR-652
Type			Long-range
Receiver	Sensor		CMOS Image Sensor
	Number of pixels		752×480 pixels
Lighting	Light source		High intensity red LED 630 nm
	LED class		Class 1 LED Product (IEC60825-1)
Laser pointer	Light source		Visible semiconductor laser, Wavelength 660 nm
	Output		60 µW
	Pulse duration		200 µs
	Laser class		Class 1 Laser Product (IEC60825-1, FDA (CDRH) Part 1040.10^*1)
I/O specifications	Control input	Number of Inputs	2
		Input type	Bidirectional voltage input
		Maximum rating	26.4 VDC
		Minimum ON voltage	15 VDC
		Maximum OFF current	0.2 mA or less
	Control output	Number of Outputs	3
		Output type	Photo MOS relay output
		Maximum rating	30 VDC
		Maximum load current	1 output: 50 mA or less, 3 Total output 100 mA or less
		Leakage current when OFF	0.1 mA or less
		Residual voltage when ON	1 V or less
	Ethernet	Communication standard	10BASE-T/100BASE-TX Cat.5
		Supported protocol	TCP/IP, EtherNet/IP™, FTP, BOOTP
	Serial communication	Communication standard	RS-232C compliant
		Transmission speed	9600, 19200, 38400, 57600, 115200 bps
		Synchronisation method	Asynchronous
Reading specifications	Supported symbol	2D	QR, MicroQR, DataMatrix (ECC200), PDF417, MicroPDF, MaxiCode, Composite character (CC-A, CC-B, CC-C)
		Barcode	GS1Databar, CODE39, ITF, Industrial2of5, NW-7 (Codabar), CODE128, GS1-128, CODE93, JAN/EAN/UPC, TriopticCODE39, Postal
	Minimum resolution	2D	0.19 mm
		Barcode	0.17 mm
	Reading distance (typical examples)	DataMatrix QR	180 to 305 mm (Cell size= 0.5 mm)
		Barcode	180 to 330 mm (Narrow bar width = 0.5 mm)
	Focal distance		250 mm
	Field of View (at focal distance)		65.0 mm×41.5 mm
Rating	Power voltage		Control port: 24 VDC ±10 % or Ethernet port: PoE TypeA/B 36 to 57 V (Cannot supply at the same time)^*2
	Current consumption		Control port: 220 mA (When 24 VDC power supply is used) Ethernet port: PoE Power Class 2^*3
Environmental resistance	Enclosure rating		IP65
	Ambient light		Sunlight: 10,000 lux, Incandescent lamp: 6,000 lux, Fluorescent lamp: 2,000 lux
	Ambient temperature		0 to +45 °C
	Storage temperature		-10 to +50 °C
	Relative humidity		35 to 95 % RH (No condensation)
	Storage relative humidity
	Operating environment		No dust or corrosive gas present
	Vibration resistance		10 to 55 Hz, Double amplitude 1.5 mm, 55 to 500 Hz, Acceleration 5G, 3 hours in each of the X, Y, and Z directions
Weight			Approx. 175 g
^1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^2 To comply with CSA No.61010-1/UL61010-1/IEC61010-1, use the following power supply. - one that provides Class 2 output as defined in the CEC and NEC, or - one that has been evaluated as a Limited Power Source as defined in CAN/CSA-C22.2 No.60950-1/UL60950-1/IEC60950-1. ^*3 Peak operating current for PoE Power Class 2: 210 mA maximum.

Data Sheet (PDF) Other Models