Image Dimension Measurement System

IM-7000 series

This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

Recommended Replaceable Products: Controller - IM-8001

Controller IM-7001

IM-7001 - Controller

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Data Sheet (PDF)

Data Sheet (PDF)

Specifications

Model			IM-7001^*1
Type			Controller
Image sensor			1” 6.6 mega pixel monochrome CMOS
Display			10.4” LCD monitor (XGA: 1024 × 768)
Receiver lens			Double telecentric lens
Image measurement	Field of view		Wide-field measurement mode: 200 mm × 200 mm (4 × R50) High-precision measurement mode: 125 × 125 mm
	Minimum display unit		0.1 µm
	Repeatability	W/o stage movement	Wide-field measurement mode: ±1 µm High-precision measurement mode: ±0.5 µm
		With stage movement	Wide-field measurement mode: ±2 µm High-precision measurement mode: ±1.5 µm
	Measurement accuracy (±2σ)	W/o binding	Wide-field measurement mode: ±5 µm^2 High-precision measurement mode: ±2 µm^3
		With binding	Wide-field measurement mode: ± (7 + 0.02 L) µm^4 High-precision measurement mode: ± (4 + 0.02L) µm^5
Light probe Measurement	Measurable area (XY)		90 × 90 mm
	Maximum measurement depth		30 mm
	Light probe diameter		ø3 mm
	Measuring force		0.015 N
	Repeatability		±2 µm^*6
	Measurement accuracy		± (8 + 0.02 L) µm^*7
External remote input			Non-voltage input (with and without contact)
External output	OK/NG/FAIL/MEAS.		PhotoMos output Rated load 24 VDC 0.5 A ON resistance 50 mΩ or lower
Interface	LAN		RJ-45 (10BASE-T/100BASE-TX/1000BASE-T)
	USB 3.1		4 ports (rear: 4)
	USB 2.0 series A		2 ports (front: 2)
Record	Hard disk drive		500 GB
Illumination system	Transparent		Telecentric transparent illumination
	Ring		Four division ring illumination (IM-7010) Four division, multi-angle illumination (electric), Slit ring (directivity) illumination (electric) (IM-7020)
XY stage	Moving range		100 × 100 mm (electric)
	Withstand load		5 kg
Z stage	Moving range		75 mm (electric)
Power supply	Power voltage		100 to 240 VAC 50/60 Hz
	Power consumption		430 VA or lower
Environmental resistance	Pollution degree		2
	Overvoltage category		II
	Ambient temperature		+10 to +35 °C
	Relative humidity		20 to 80 % RH (No condensation)
Weight			Approx. 8 kg
^1 Light probe measurement (IM-7020 only) ^2 In the range of ø80 mm, within the operating ambient temperature range of +23°C ±1°C at the focused focal point position ^3 In the range of ø20 mm within the operating ambient temperature range of +23°C ±1°C at the focused focal point position ^4 In the range of 180 × 180 mm (4 × R40), within the operating ambient temperature range of +23°C ±1°C at the focused focal point position, and with a load weighing 2 kg or less on the stage (L = amount of stage movement in mm units) ^5 In the range of 120 × 120 mm, within the operating ambient temperature range of +23°C ±1°C at the focused focal point position, and with a load weighing 2 kg or less on the stage (L = amount of stage movement in mm units) ^6 When the detection system is standard. If the detection system is at a deep position, then ±3 µm ^*7 When the detection system is standard, and the ambient temperature is 23°C ±1°C, with a stage load weighing 2 kg or less. If the detection system is at a deep position, then ± (10 + 0.02 L) µm with L as the measurement length in mm.

Data Sheet (PDF) Other Models