Specs : High-speed 2D/3D Laser Profiler - LJ-V7000 series

Model		LJ-V7001	LJ-V7001P
Image
Number of connectable sensors		Max. 2 units
Display	Minimum displayable unit	0.1 µm, 0.00001 mm², 0.01°
	Maximum display range	±9999,99mm, ±9999,99mm²
Input terminal block	Laser remote interlock input	Non-voltage input^*1
Input terminal block	Encoder input	NPN open-collector output, voltage output (5 V/12 V/24 V), and line-driver output all supported
Input terminal block	Trigger input	Non-voltage input^*1	Voltage input^*4
	Timing 1,2 input
	Auto-zero 1,2 input
Input terminal block	Reset 1, 2 input
Input terminal block	Start measurement/stop input
	Start storage/stop input
	Clear memory input
	Laser OFF input
	Programme switch input	Non-voltage input x 4 inputs^*1	Voltage input x 4 inputs^*4
Output terminal block	Analogue voltage output	±10 V x 2 outputs, Output impedance: 100 Ω
Output terminal block	OUT comparator output	NPN open collector output x 12 outputs^*2 (Can freely assign 16 OUTs x 3 stage judgement results)	PNP open collector output x 12 outputs^*5 (Can freely assign 16 OUTs x 3 stage judgement results)
	Strobe output	NPN open collector output^*2	PNP open collector output^*5
	Disable trigger output
	Memory FULL output
	Ready output
Output terminal block	Error output	NPN open collector output (N.C.)^*2	PNP open collector output (N.C.)^*5
PC interface	Ethernet	1000BASE-T/100BASE-TX^*3
	USB	USB 2.0 high speed compliant (USB 1.1 Full-SPEED compatible)^*3
	RS232C	Measurement data output and control I/O (Can select a baud rate of up to 115,200 bits/s)
Rating	Power voltage	24 VDC ±10 %, including Ripple (P-P)
	Current consumption	1.3 A or less when connected to 1 head 1.9 A or less when connected to 2 heads
Environmental resistance	Ambient temperature	0 to +50 °C
	Relative humidity	85% RH or less (no condensation)
Weight		Approx. 1,500 g
^1 The rating for non-voltage input is up to 1 V for ON voltage and up to 0.6 mA for OFF current ^2 The rating for NPN open-collector output is up to 50 mA (40 V or less), residual voltage of up to 1 V ^3 Sample DLL and LabVIEW programs are available. Contact your local sales office for details. ^4 The rating for voltage input is a maximum input voltage of 26.4 V, a minimum ON voltage of 10.8 V, and up to 0.6 mA for OFF current ^*5 The rating for PNP open-collector output is up to 50 mA (30 V or less), residual voltage of up to 1 V

Back to top

Model		LJ-VM100
Image
Monitor output		Analog RGB XGA (1024 × 768) Touch panel monitor (CA-MP120T), specialized connector included
Rating	Power voltage	Supplied from the controller
	Power consumption	2.5 W or less
Environmental resistance	Ambient temperature	0 to +50 °C
	Relative humidity	20 to 85 % RH (No condensation)
Weight		Approx. 400 g

Back to top

Model			LJ-V7060K	LJ-V7060	LJ-V7080	LJ-V7200	LJ-V7300
Image
Mounting conditions			Specular reflection	Diffuse reflection
Reference distance			54.6 mm	60 mm	80 mm	200 mm	300 mm
Measurement range	Z-axis (height)		±7.6 mm (F.S.=15.2 mm)	±8 mm (F.S.=16 mm)	±23 mm (F.S.=46 mm)	±48 mm (F.S.=96 mm)	±145 mm (F.S.=290 mm)
	X-axis (width)	NEAR side	8 mm	13.5 mm	25 mm	51 mm	110 mm
		Reference distance	14 mm	15 mm	32 mm	62 mm	180 mm
		Far side	8 mm		39 mm	73 mm	240 mm
Light source	Type		Blue semiconductor laser
	Wavelength		405 nm (visible beam)
	Laser class		Class 2 Laser Product (IEC60825-1, FDA(CDRH) Part 1040.10^*1)	Class 2M Laser Product^10 (IEC60825-1, FDA(CDRH) Part 1040.10^1)	Class 2 Laser Product (IEC60825-1, FDA(CDRH) Part 1040.10^*1)
	Output		4.8 mW	10 mW	4.8 mW
Spot size (reference distance)			Approx. 21 mm × 45 µm		Approx. 48 mm × 48 µm	Approx. 90 mm × 85 µm	Approx. 240 mm × 610 µm
Repeatability	Z-axis (height)		0.4 µm^2^3		0.5 µm^2^3	1 µm^2^3	5 µm^2^3
	X-axis (width)		5 µm^2^4		10 µm^2^4	20 µm^2^4	60 µm^2^4
Linearity	Z-axis (height)		±0.1% of F.S.^*5				±0.05 to ±0.15% of F.S.^5^11
Profile data interval	X-axis (width)		20 µm		50 µm	100 µm	300 µm
Sampling cycle (trigger interval)			Top speed: 16 µs (high-speed mode), Top speed: 32 µs (advanced function mode)^*6
Temperature characteristics			0.01% of F.S./°C
Environmental resistance	Enclosure rating		IP67 (IEC60529)^*7
	Ambient light		Incandescent lamp: 10,000 lux max.^*8
	Ambient temperature		0 to +45 °C^*9
	Relative humidity		85% RH or less (no condensation)
	Vibration resistance		10 to 57 Hz, Double amplitude 1.5 mm, 3 hours in each of the X, Y, and Z directions
	Shock resistance		15 G/6 ms
Material			Aluminium
Weight			Approx. 450 g		Approx. 400 g	Approx. 550 g	Approx. 1,000 g
^1 The laser classification for FDA(CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^2 This value is from a case in which measurement has been performed with a reference distance with 4,096 times of averaging. ^3 The measurement targets are KEYENCE standard targets. This value is from a case in which the average height of the default setting area has been measured in height mode. All other settings are default. ^4 The measurement target is a pin gauge. This value is from a case in which the position of the intersection between the rounded surface of the pin gauge and the edge level has been measured in position mode. All other settings are default. ^5 The measurement targets are KEYENCE standard targets. The profile data is from a case in which measurement has been performed with 64 times of smoothing and 8 times of averaging. All other settings are default. ^6 For high-speed mode, when the measurement area is at its minimum, binning is ON, image capture mode is set to standard, and parallel image capture is ON. All other settings are default. For advanced function mode, when the measurement area is at its minimum, binning is ON and image capture mode is set to standard. All other settings are default. ^7 This value is from a case in which the sensor head cable (CB-B) or extension cable (CB-BE) has been connected. ^8 This is the illuminance for the light-receiving surface of the sensor head during white paper measurement when light has been shined onto the white paper. ^9 The sensor head must be mounted on a metal plate for use. ^10 Do not look into the beam directly using any optical instruments (such as eye loupes, magnifiers, microscopes, telescopes, or binoculars). Viewing the laser output with an optical instrument may pose an eye hazard. ^*11 The linearity will differ depending on the measurement area.

Back to top

Specs High-speed 2D/3D Laser Profiler LJ-V7000 series