Head: Standard model with monitor camera LS-9030M

LS-9030M - Head: Standard model with monitor camera

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		LS-9030M^*1
Type		Head: Standard model
Measurement range		0.3 mm (0.08 mm) to 30 mm
Smallest detectable object		0.3 mm (0.08 mm)
Transmitter/receiver distance		160 ±40 mm
Repeatability		±0.1 µm^*2
Measurement accuracy		±2 µm^*3
Sampling cycle		16,000 samples/sec.^*4
Transmitter/receiver direction and position detection	Detection area	20 x 24 mm
	Smallest detectable object	0.3 mm
	Repeatability	±0.2 mm^*5
	Sampling cycle	4,000 samples/sec.
Light source		InGaN green LED
Monitor camera		Provided
Environmental resistance	Enclosure rating	IP67 (including connector)
	Ambient light	Incandescent lamp/Fluorescent lamp: 3,000 lux or lower
	Ambient temperature	0 to +50 °C
	Relative humidity	20 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
	Shock resistance	15 G/6 ms
Material		Aluminum
Weight		Transmitter: Approx. 440 g Receiver: Approx. 500 g Base: Approx. 430 g
^1 The values in brackets are measured in ultra-thin mode. For details on the accuracy of ultra-thin mode, contact the nearest KEYENCE office. ^2 A ±2σ margin of error when measuring a ø10 mm rod in the centre of the measurement area using outer diameter mode with the average measurement number set as 2,048 times. ^3 Margin of error when a moving ø10 mm rod is measured in the 10 mm x 20 mm measurement area using outer diameter mode. ^4 The sampling cycle is changed by the number of OUT set, and by the use of the mutual interference prevention function. ^*5 A ±2σ margin of error when measuring the position of a ø10 mm rod in the centre of the measurement area with the average measurement number set as 512 times.

Data Sheet (PDF) Other Models