Sensor Head 500 L/min FD-MH500A

FD-MH500A - Sensor Head 500 L/min

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		FD-MH500A^*1
Shape		Separate amplifier
Rated flow range		25 to 500 L/min^2^3
Possible display range		25 to 1000 L/min^*4
Connection diameter		Rc2 (50A)
Allowable fluid		Water or non-corrosive fluid
Conductivity of detection fluids		With 25-500 L/min : 5 µS/cm or higher With 500-1000 L/min : 20 µS/cm or higher
Detection fluid temperature		0 to +85°C (No freezing)
Pressure loss		0.01 MPa max.^*5
Display power		Bar display (2 colours), other indicators
Environmental resistance	Enclosure rating	IP67
	Pressure resistance	2.0 MPa
	Applied pressure range	1.0 MPa or less
	Ambient temperature	0 to +50 °C (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Material	Liquid end materials	Bore : SCS13, Measurement pipe : PPS, O ring : fluoro-rubber (FKM)
Material properties	Other parts	Plastic case areas : PBT, Indicator : polyalylate, Metal case areas : SUS430, Cable : PVC
Accessories		Warnings
Weight		Approx. 3,700 g
^1 The models with “A” at the end of the name support the amplifier type A. They operate normally even when connecting the conventional amplifier without “A” at the end. ^2 The rated flow range indicates the range that is supposed to be used in general. ^3 The rated flow range indicates recommended operating range. ^4 Can be used within the display range as well as within the rated flow range. ^*5 Excluding times when using FD-MH500A at 500 L/min to 1000 L/min.