Amplifier Unit NPN AP-C40W

Model

AP-C40W

Type

Amplifier Unit, NPN

Applicable sensor head

AP-41M, AP-41, AP-43, AP-44, AP-48

Set and display range

-15 to +110 % of F.S.^*1

Display

3 1/2-digit, 2-colour, 7-segment LED (Character height: 11 mm), Display cycle: 10 times/s

Operation indicator

Red LED x 2 (corresponding to control output 1 and 2)

Repeatability

±0.2 % of F.S.

Display resolution

AP-41M/41: Standard mode 0.1 kPa, High-resolution/Focus mode 0.01 kPa
AP-43: Standard mode 0.001 MPa, High-resolution/Focus mode 0.1 kPa
AP-44/48: Standard mode 0.1 kPa, High-resolution/Focus mode 0.02 kPa

Power consumption

Normal

12 V: 780 mW (65 mA) max., 24 V: 1,080 mW (45 mA) max.

Display temperature characteristic

±1 % of F.S. max.

Hysteresis

Variable (Standard: 0.5 % of FS; high-resolution/focus mode: 0.1 % of F.S.)

Response time (Chattering prevention function)

1 (in high-speed mode only), 2.5, 5, 100, or 500 ms (selectable)

I/O

Analogue output

1 to 5 V with load impedance of 1 kW max. (or zero-shift input selectable)

Zero-shift input

Input time: 2 ms or more (or analog output selectable)

Control output

NPN open collector 100 mA max. (at 40 V or below) with max., residual voltage of 1 V, 2 outputs (NO or NC selectable)

Rating

Power voltage

12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less

Power consumption

Eco mode

12 V: 540 mW (45 mA) max., 24 V: 840 mW (35 mA) max.

Environmental resistance

Ambient temperature

0 to +50 °C (No freezing)

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

Material

Front housing: Polysulfone, Rear housing: PBT, Front seat: Polycarbonate

Accessories

Power supply code (2-m cable with connector), head connector, and unit seal

Weight

Approx. 74 g (with 2-m cable)