Specs : Digital Infrared Temperature Sensor - FT series

Sensor head

Model		FT-H10	FT-H20	FT-H30	FT-H50	FT-H40K	FT-H50K
Image
Type		Mid to low temperature Small-spot	Mid to low temperature Mid-range	Mid to low temperature Long-range	Mid to low temperature Ultra long-range	High temperature Mid-range	High temperature Ultra long-range
Rated temperature range		0 to 500°C^*1				0 to 1350°C^*1
Displayable temperature range		-50 to +520°C				-50 to +1400°C
Detecting distance		Unlimited ^*2
Measuring distance / View diameter (example)		17.5/ø6.3 mm 35/ø1.5 mm 52.5/ø8 mm	60/ø8.5 mm 120/ø6 mm 180/ø14.5 mm	200/ø15 mm 400/ø18 mm 600/ø33 mm	500/ø18 mm 1500/ø30 mm 3000/ø75 mm	100/ø7.5 mm 150/ø6 mm 300/ø11.5 mm	500/ø18 mm 1500/ø30 mm 3000/ø75 mm
Sight		2-point visible laser beam^*3
Detecting element		Thermopile
Detecting wavelength		8 to 14 µm
Repeatability		±0.5°C			±3°C
Emissivity (ε) correction		0.10 to 1.99 (0.01 step)
Environmental resistance	Ambient temperature	-10 to +55 °C (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z axis
	Shock resistance	500 m/s², 10 times in each direction of each of X, Y and Z axis, 60 times in total
Material		Case: Reinforced glass plastic, Infrared collector lens: Germanium, Laser transmitter: Polyarylate Lens tube^*4: Aluminum, Cable: Vinyl chloride, Mounting bracket: SUS304, Mounting screw: Stainless steel
Material	Mounting bracket	SUS304
Accessories		Mounting bracket
Weight		Approx. 120 g			Approx. 150 g
^1 Repeatability is guaranteed within the rated temperature range. ^2 Place at a distance so that object appears 1.5 times larger than the view diameter. ^3 Visible semiconductor laser beam wavelength 655 nm, Class 1 Laser Product ［IEC60825-1, FDA (CDRH) Part1040.10］. The laser classification for FDA (CDRH) is implemented based on IEC 60825-1 in accordance with the requirements of Laser Notice. ^4 No lens tube on models FT-H10, FT-H20, and FT-H30.

Back to top

Model		FT-50AW	FT-55AW
Image
Type		DIN-rail mounting type	Panel mounting type
Rating	Power voltage	12 to 24 V DC ±10% ripple (P-P) 10% or less
Power consumption	Normal	1400 mW (For 12 V), 1600 mW (For 24 V)
Powerconsumption	Eco mode	1150 mW (For 12 V), 1350 mW (For 24 V)
Display power		4 + 1/two-digit 7-segment LED, dual-display (red/green) display (character height in the upper display (red): 8 mm, character height in the lower display (green): 5.7 mm), Display updating cycle: 10/s
Operation indicator		Red LED x 3 (control output1/control output2/timing input indicator)
Display resolution		0.1°C or 1°C (0.2°F or 1.8°F) (when using H10/H20/H30), 1°C (1.8°F) (when using H50/H40K/H50K)
Hysteresis		Variable
Response		HSP, 30, 100, 200, 500, 1000, or 5000 ms can be selected (In HSP: 10ms typ., 15 ms max.)
Bank selection		Pink and Purple wires can be configured for Bank Inputs #1,2 respectively for up to 4 total banks.
Bank specifications		Emissivity (valid in temperature mode) and limit settings x 2 can be set for each bank.
External input	Timing input	Input time: 2 ms min.
	Bank input	Input time: 20 ms min.
Control output		NPN open collector x 2 channels (N.O./N.C. selectable), 100 mA max. (40 VDC max.), residual voltage: 1 V max.
Analogue output		4 to 20 mA, maximum load resistance: 260 Ω The upper- and lower-limit values of the analog output range can be set optionally.
Environmental resistance	Ambient temperature	-10 to +50 °C (No freezing)^*1
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z axis
Material		Main unit, Cover: Polycarbonate Keycaps: Polyester elastomer Cable: Vinyl chloride Mounting bracket: SPCC	Main unit, Cover: Polycarbonate Keycaps: Polyester elastomer Cable: Vinyl chloride Panel mounting bracket: Polyacetal front protection cover: Polycarbonate
Accessories		DIN anchoring fixture, power cable, unit cover sticker	Panel mounting bracket, protection cover, power cable, unit cover sticker
Weight		Approx. 85 g
^*1 Ambient temperature when using the analog output is -10 to 45 °C

Back to top

Model		FT-50AWP	FT-55AWP
Image
Type		DIN-rail mounting type	Panel mounting type
Rating	Power voltage	12 to 24 V DC ±10% ripple (P-P) 10% or less
Power consumption	Normal	1400 mW (For 12 V), 1600 mW (For 24 V)
Powerconsumption	Eco mode	1150 mW (For 12 V), 1350 mW (For 24 V)
Display power		4 + 1/two-digit 7-segment LED, dual-display (red/green) display (character height in the upper display (red): 8 mm, character height in the lower display (green): 5.7 mm), Display updating cycle: 10/s
Operation indicator		Red LED x 3 (control output1/control output2/timing input indicator)
Display resolution		0.1°C or 1°C (0.2°F or 1.8°F) (when using H10/H20/H30), 1°C (1.8°F) (when using H50/H40K/H50K)
Hysteresis		Variable
Response		HSP, 30, 100, 200, 500, 1000, or 5000 ms can be selected (In HSP: 10ms typ., 15 ms max.)
Bank selection		Pink and Purple wires can be configured for Bank Inputs #1,2 respectively for up to 4 total banks.
Bank specifications		Emissivity (valid in temperature mode) and limit settings x 2 can be set for each bank.
External input	Timing input	Input time: 2 ms min.
	Bank input	Input time: 20 ms min.
Control output		PNP open collector x 2 channels (N.O./N.C. selectable), 50 mA max. (30 VDC max.), residual voltage: 1 V max.
Analogue output		4 to 20 mA, maximum load resistance: 260 Ω The upper- and lower-limit values of the analog output range can be set optionally.
Environmental resistance	Ambient temperature	-10 to +50 °C (No freezing)^*1
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z axis
Material		Main unit, Cover: Polycarbonate Keycaps: Polyester elastomer Cable: Vinyl chloride Mounting bracket: SPCC	Main unit, Cover: Polycarbonate Keycaps: Polyester elastomer Cable: Vinyl chloride Panel mounting bracket: Polyacetal front protection cover: Polycarbonate
Accessories		DIN anchoring fixture, power cable, unit cover sticker	Panel mounting bracket, protection cover, power cable, unit cover sticker
Weight		Approx. 85 g
^*1 Ambient temperature when using the analog output is -10 to 45 °C

Back to top

Model		FT-S1^*1
Image
Air supply	Recommended flow rate	15ℓ/min
	Withstanding pressure	1 MPa or less (at inlet)
Conforming tube diameter		ø6 mm
Material		Housing: zinc, cap: aluminum, cable packing and O-ring: NBR, fitting: Brass nickel-plated
Weight		Approx. 700 g
^*1 FT-S1 does not provide cooling.

Back to top

Model				FT-S2
Image
Infrared transmissivity				85 % or more^*1
Material				Cap: aluminum, lens: germanium, O-ring: NBR
Weight				Approx. 32 g
^*1 Infrared transmissivity for wavelength of 8 to 14 µm.

Back to top

Model				OP-91147
Image
Emissivity				0.95
Allowable temperature limit				180°C (356°F)
Size				Width: 50 mm , length: 10 m
Weight				Approx. 145 g

Back to top

Specs Digital Infrared Temperature Sensor FT series

Sensor head