Specs CMOS Analogue Laser Sensor IA series

Sensor head

Model		IA-030	IA-065	IA-100
Image
Reference distance		30 mm	65 mm	100 mm
Measurement range		20 to 45 mm	55 mm to 105 mm	75 mm to 130 mm
Light source	Type	Red semiconductor laser, wavelength: 655 nm (visible light)
	Laser class	Class 1 (FDA (CDRH) Part1040.10)^*1 Class 1 (IEC 60825-1)	Class II (FDA (CDRH) Part1040.10) Class 2 (IEC 60825-1)
	Output	220 µW	560 µW
Spot diameter (at standard distance)		Approx. 200 x 750 µm	Approx. 550 x 1,750 µm	Approx. 400 x 1,350 µm
Linearity		±0.1% of F.S. (F.S.=±5 mm, 25 to 35 mm)^*2	±0.1% of F.S. (F.S.=±10 mm, 55 to 75 mm)^*2	±0.15% of F.S. (F.S.=±20 mm, 80 to 120 mm)^*2
Repeatability		2 µm^*3	4 µm^*3	10 µm^*3
Sampling cycle		0.33/1/2/5 ms (4 levels available)
Operation status indicators		Laser warning: Green LED, Analogue output: Red LED, Measurement centre: Green LED
Temperature characteristics		0.05% of F.S./°C (F.S.=±5 mm, 25 to 35 mm)	0.06 % of F.S./°C (F.S. = ±10 mm, 55 to 75 mm)	0.06 % of F.S./°C (F.S. = ±20 mm , 80 to 120 mm)
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp: 5,000 lux^*4	Incandescent lamp: 7,500 lux^*4
	Ambient temperature	-10 to +50 °C (No condensation or freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z axis
Material		Housing material: PBT Metal parts: SUS304 Packing: NBR Lens cover: Glass Cable: PVC
Weight		Approx. 120 g (including cable)	Approx. 130 g (including cable)
^1 The classification is implemented based on IEC 60825-1 following the requirement of Laser Notice of FDA (CDRH). ^2 Value when measuring the KEYENCE standard target (white diffuse object). ^3 Value when measuring the KEYENCE standard target (white diffuse object) at the reference distance, sampling rate: 1 ms, and average number of times: 16. ^4 Value when the sampling rate is set to 2 ms or 5 ms.

Amplifier

Model		IA-1000
Image
Head compatibility		Yes
Display rate		Approx. 10 times/sec
Minimum displayable unit		1 µm (IA-030), 2 µm (IA-065/IA-100)
Display range		-99.999 to 99.999 mm (IA-030) · -99.998 to 99.998 mm (IA-065/IA-100)
Analogue output voltage		0.5 to 4 V, Output impedance 100 Ω
Control input	Bank switch input	Non-voltage input^*1
Control input	Zero-shift input
	Stop emission input
Rating	Power voltage	10 to 30 VDC, including Ripple (P-P) 10 %
	Power consumption	1500 mW max. (at 30 V; 50 mA max.)
Environmental resistance	Ambient temperature	-10 to +55 °C (No condensation or freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z axis
Material		Front sheet: Polycarbonate Key tops: Polyacetel Cable: PVC
Weight		Approx. 110 g (including cable)
^*1 Either bank switching input or zero shift input can be is used. The rated non-voltage input is: ON voltage, 2 V or less; OFF current, 0.05 mA or less.