High-Accuracy Digital Contact Sensor
GT2 series
Extension Board for GT2-100N GT2-E3N
*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.
Specifications
Model | GT2-E3N | |||
Mounting type | Installed into GT2-100N/100P (up to 3 boards) | |||
Output | NPN output | |||
Main unit/Expansion unit | - | |||
Power supply voltage | Supplied from the GT2-100N/100P | |||
Power consumption | Normal | Eco half: 4,200 mW or less (140.0 mA or less at 30 V), Eco all: 4,000 mW or less (133.3 mA or less at 30 V)*1 | ||
Power saving (Eco) | 4,000 mW or less (133.3 mA or less at 30 V) | |||
Display range | - | |||
Display resolution | ||||
Control input | Timing/preset/ | No-voltage input | ||
Control output | HH/HI/GO/LO/LL | NPN open collector, 40 V 50 mA or less*2, residual voltage 1 V or less | ||
Response time | hsp(3)/5/10/100/500/1,000 ms | |||
Environmental resistance | Ambient temperature | -10 to +50 °C | ||
Relative humidity | 35 to 85 % RH (No condensation) | |||
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |||
Material | Main body case/front cover: polycarbonate (PC), Key top: polyacetal (POM), Front sheet: polyethylene terephthalate (PET) | |||
Power supply / I/O cable | I/O: 30-pin connector (MIL standard) | |||
Weight | Approx. 80 g | |||
*1 When the maximum number of sensor heads is connected, and all devices are set to power saving settings | ||||