Shock Sensor
GA series
Specs Shock Sensor GA series
Sensor head
|
Model |
GH-413 |
GH-313A |
|||
|
Image |
|
|
|||
|
Type |
General-purpose |
High-sensitivity |
|||
|
Response frequency |
100 Hz to 8 kHz (-3dB) |
40 Hz to 8 kHz (-3dB) |
|||
|
Minimum detectable acceleration |
9.8 m/s2 (1G) |
0.98 m/s2 (0.1G) |
|||
|
Environmental resistance |
Enclosure rating |
IP67 |
|||
|
Ambient temperature |
-10 to +60 °C |
||||
|
Relative humidity |
35 to 95 % RH (No condensation) |
||||
|
Vibration resistance |
10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions |
||||
|
Weight |
Approx. 70 g (including 3-m cable) |
Approx. 80 g (including 3-m cable) |
|||
Amplifier
|
Model |
GA-223 |
|||
|
Image |
|
|||
|
Type |
DC type |
|||
|
Applicable sensor head |
GH-413, 313A |
|||
|
Sensitivity adjustment |
Sensitivity selector switch & potentiometer trimmer |
|||
|
Response frequency |
100 Hz to 8 kHz (-3dB) |
|||
|
Minimum detectable acceleration |
9.8 m/s2 (GH-413), 4.9 m/s2 (GH-313A) |
|||
|
Indicator lamp |
Power and output indicator |
|||
|
Output |
Control output |
Solid-state |
NPN: 200 mA (40V) max.*1 |
|
|
Relay |
―*1 |
|||
|
Analogue |
||||
|
Output delay time |
1 ms |
|||
|
Operation mode |
N.O./N.C. |
|||
|
ON-delay timer |
OFF/0.5 s (switch-selectable) |
|||
|
OFF-delay time |
ON-delay timer ON: 200 ms, OFF: 30 ms |
|||
|
Rating |
Power voltage |
10 to 28 VDC, Ripple (P-P) 10 % or less |
||
|
Power/current consumption |
25 mA max. |
|||
|
Environmental resistance |
Ambient temperature |
0 to +50 °C |
||
|
Relative humidity |
35 to 85 % RH (No condensation) |
|||
|
Vibration resistance |
10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions |
|||
|
Weight |
Approx. 105 g |
|||
|
*1 NPN output can easily be converted to PNP output by connecting the optional OP-5148 PNP Output Converter. |
||||
